The provision of mirrors needs to be regulated prior to the movement of the car.

To change the provision of an internal rear-view mirror with adaptation against dazzle by light of headlights of the car moving behind lift up or lower the lever located in the lower part of the case of a mirror down.

Fig. 1.1. Dashboard: 1 – handle of adjustment of provision of a rear-view mirror; 2 – control lamps of indexes of turn of the trailer and anti-blocking system of brakes (ABS); 3 – switch of dimensional light and light of headlights; 4 – side воздуходув systems of heating and ventilation; 5 – the handle of draft of the air gate (the carburetor engine) or the regulator of frequency of rotation of a bent shaft idling (for increase in frequency at launch of the cold diesel engine); 6 – switch of indexes of turn and light of headlights; 7 – switch of the alarm light system; 8 – combination of devices; 9 – the switch of a cleaner and washer of a windshield with the button of switching of the multiinformation display; 10 – ignition lock; 11 – central воздуходув systems of heating and ventilation; 12 – radio receiver or radio tape recorder; 13 – from left to right: switch of control of power windows of back doors, switch of heaters of seats, switch of a heater of back glass, switch of fog light of headlights; 14 – control panel of system of heating and ventilation; 15 – ware box; 16 – control panel of power windows; 17 – cowl lock drive handle; 18 – assembly block of safety locks and relay; 19 – the handle of adjustment of provision of a steering column on height; 20 – button of a sound signal; 21 – gear shifting lever (mechanical transmission) or selector of the choice of transfers (automatic transmission); 22 – lever of the parking brake; 23 – ashtray; 24 – lighter

External rear-view mirrors need to be adjusted so that in them lateral faces of the car were looked through. External mirrors adjustments of situation operate from salon movement of handles 1 (see fig. 1.1). External rear-view mirrors cope with the electric drive movement of the handle (fig. 1.6) of the driver's doors. The choice of a mirror for adjustment is carried out by pressing of buttons – "L" and "R".

Fig. 1.6. Control panel of the electric drive of rear-view mirrors

At failure of the electric drive of management of mirrors they can be established in required position manually.

Spherical or mirrors with a big viewing angle, on the one hand, increase visibility, and with another – reduce the image size therefore it is difficult to define distance to the objects moving behind. It needs to be considered at their installation.

Rear-view mirrors with the electric drive can be equipped with electric heaters which join along with a heater of back glass.