VW Passat repair


+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
- 3. Engines
   + 3.1. Petrol engines of configuration R4
   + 3.2. Petrol engine of configuration of VR6
   - 3.3. Diesel engines
      3.3.1. Technical characteristics
      3.3.2. General information
      3.3.3. Installation of the piston of the cylinder No. 1 in VMT
      3.3.4. Check of a compression in cylinders
      3.3.5. Gear belt of the GRM drive
      3.3.6. Mechanism of a tension of a gear belt
      3.3.7. Cogged pulley of the camshaft
      3.3.8. Cogged pulley of a bent shaft
      3.3.9. Pulley of an intermediate shaft
      3.3.10. Belts of the drive of auxiliary units
      3.3.11. Cover of a head of the block of cylinders
      3.3.12. Replacement of an epiploon of the camshaft
      3.3.13. Replacement of an epiploon of an intermediate shaft
      3.3.14. Replacement of epiploons of a bent shaft
      3.3.15. Replacement of an epiploon of a forward cover of a bent shaft
      3.3.16. Head of the block of cylinders
      3.3.17. Check of work of hydraulic pushers
      3.3.18. Flywheel
      3.3.19. Replacement of support of the power unit
      3.3.20. Oil case
      3.3.21. Oil pump
      3.3.22. Top casing of the AFN engine
      3.3.23. System of prestarting heating of diesel engines
      3.3.24. Glow plugs
+ 4. Cooling system
+ 5. Power supply system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
+ 13. Wheels and tires
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
+ 16. Body
+ 17. Electric circuits



ed639308


Repair Volkswagen Passat B3-B4/Passat B3-B4>> Engines>> Diesel engines>> Top casing of the AFN engine
Carry out removal and installation of the top casing of the AFN engine in the following order:
– by means of the thin screw-driver remove the caps closing nuts of fastening of the top casing of the engine and turn out the nuts which are under caps;
– remove the top casing of the AFN engine.
You make installation of the removed elements in the sequence, the return to removal.