General information:

the design of fastening of a flywheel and elements of coupling is various depending on type of the applied transmission;

on cars with the five-speed transmission (020) press the clutch plate is attached by bolts to the end of a bent shaft, the flywheel is connected by bolts to a press clutch plate;

Fig. 3.71. Krivoshipno-shatunny mechanism: 1, 2 – a pulley of an auxiliary driving belt; 3 – pulley; 4 – connecting rods; 5 – rod; 6 – plug; 7 – rod bolt; 8 – lock ring; 9 – piston; 10, 11, 12 – piston rings; 13 – piston finger; 14 – flywheel; 15 – gear wreath of a flywheel; 16 – bent shaft; 17 – persistent half rings; 18 – radical inserts

on cars with five-step (020A, 085) and four-stage (084) transmissions an arrangement traditional: the flywheel of 14 (fig. 3.71) is established on a bent shaft, press the disk is established on a flywheel.

Removal and installation of a flywheel see in section 3.1.8.