VW Passat repair+ 1. Ekspluatatsiiya of the car + 2. Maintenance + 3. Engines + 4. Cooling system + 5. Power supply system + 6. System of ignition + 7. Coupling + 8. Transmission + 9. Drive of forward wheels + 10. Suspension brackets + 11. Steering - 12. Brake system 12.1. Technical characteristics 12.2. General information + 12.3. Maintenance - 12.4. Replacement of front brake shoes 12.4.1. Brake VW mechanism 12.4.2. Brake Girling mechanism 12.5. Replacement of a forward support 12.6. Replacement of a forward brake disk 12.7. Replacement of the brake drum and back brake shoes on brakes of drum type 12.8. Wheel cylinder of the back brake mechanism 12.9. Replacement of brake shoes on back disk brakes 12:10. Replacement of a support of the back brake mechanism 12:11. Pressure regulator 12:12. Main brake cylinder 12:13. Tubes and hoses of the brake system 12:14. Removal of air from a hydraulic actuator of the brake system + 12:15. Anti-blocking system of brakes (ABS) 12:16. Brake pedal 12:17. Lever of the parking brake 12:18. Cables of the parking brake 12:19. Adjustment of the parking brake 12:20. Vacuum amplifier of brakes 12:21. Stoplight switch 12:22. Elimination of noise of brakes + 13. Wheels and tires + 14. Systems of heating, ventilation and conditioning + 15. Electric equipment + 16. Body + 17. Electric circuits |
Repair Volkswagen Passat B3-B4/Passat B3-B4>> Brake system>> Replacement of front brake shoes>> Brake Girling mechanism
You carry out removal of brake shoes in the following order
(12.4)
:
turn off a bolt of fastening of the lower directing finger, holding a finger from a provorachivaniye a wrench
(fig. 12.5)
;
turn a support up on the top directing finger and a podvyazhimta to a rack
(fig. 12.6)
;
take brake shoes from the holder of a support.
You carry out installation of brake shoes in the following order:
before installation of blocks check that the directing fingers freely moved in the holder of a support and there were rubber covers of the directing finger were not damaged. Check a condition of dustproof consolidation of the piston;
if new brake shoes are established, press the piston into a support. It can be made wooden whetstone or special adaptation
(fig. 12.7)
. At a piston vdviganiye brake fluid is forced out from the brake cylinder in the feeding tank. Therefore constantly watch liquid level in a tank;
check whether the thermoprotective plate in dredging of the piston is correctly established;
insert external and internal brake shoes in the holder of a support;
lower a support on brake shoes. Press a support that it reached the position, then wrap a bolt of fastening of the directing finger the required moment;
check the level of brake fluid in a tank. Several times press a brake pedal in order that blocks nestled on a disk and repeatedly check the level of brake fluid in a tank;
execute similar operations on other wheel;
establish wheels and lower the car;
repeatedly check the level of brake fluid.
|
|