You make removal in the following order:

Fig. 12.28. Parking brake: 1 — the lever; 2 — the lever handle; 3 — the top decorative overlay of the lever; 4 — the switch of a control lamp; 5 — draft; 6 — the compensator, 7 — carving tips of cables; 8 — cables of the parking brake; 9 — protective plugs

— press the handle clamps located in the lower back part of the handle and, having pulled, remove the handle 2 ( fig. 12.28 ) the lever of the emergency brake from the lever 1;

— remove the top decorative slip 3 levers;

— remove a back part of the central console;

— having turned off lock-nuts and adjusting nuts, remove them from carving tips of cables of the 8th parking brake;

— turn off two nuts of fastening of the lever to a floor and remove the lever 1 together with the compensator 6. If necessary turn the compensator on draft of the lever on 90 ° and remove it.

You carry out installation to the sequences, the return to removal.

Adjust cables of the parking brake then establish a back part of the central console and a decorative overlay for the lever.