VW Passat repair


+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
- 12. Brake system
   12.1. Technical characteristics
   12.2. General information
   + 12.3. Maintenance
   + 12.4. Replacement of front brake shoes
   12.5. Replacement of a forward support
   12.6. Replacement of a forward brake disk
   12.7. Replacement of the brake drum and back brake shoes on brakes of drum type
   12.8. Wheel cylinder of the back brake mechanism
   12.9. Replacement of brake shoes on back disk brakes
   12:10. Replacement of a support of the back brake mechanism
   12:11. Pressure regulator
   12:12. Main brake cylinder
   12:13. Tubes and hoses of the brake system
   12:14. Removal of air from a hydraulic actuator of the brake system
   - 12:15. Anti-blocking system of brakes (ABS)
      12.15.1. Principle of action
      12.15.2. Anti-blocking system of brakes with the electronic differential lock (EDS)
   12:16. Brake pedal
   12:17. Lever of the parking brake
   12:18. Cables of the parking brake
   12:19. Adjustment of the parking brake
   12:20. Vacuum amplifier of brakes
   12:21. Stoplight switch
   12:22. Elimination of noise of brakes
+ 13. Wheels and tires
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
+ 16. Body
+ 17. Electric circuits



ed639308




Repair Volkswagen Passat B3-B4/Passat B3-B4>> Brake system>> Anti-blocking system of brakes (ABS)



Anti-blocking system of brakes (ABS) – the system equipped with control units with feedback which prevent blocking of wheels during braking and keep controllability and course stability of the car.
In the anti-blocking TEVES system in one unit functions of power supply, the drive of brakes and the vacuum amplifier, and also management against blocking of wheels are carried out. The hydraulic block is installed instead of the serial vacuum amplifier with the built-in main brake cylinder. The ABS installation is possible only industrially at production of the car and cannot be conducted independently.