The oil pallet can be removed from the engine installed on the car in the following order:

Fig. 3.54. Forward and back covers of a bent shaft, oil pallet: 1 – cap of the oil channel; 2 – block of cylinders; 3 – GRM drive cover; 4 – bolt of fastening of a back cover of a bent shaft; 5 – back cover of a bent shaft; 6 – back epiploon of a bent shaft; 7 – laying of the oil pallet; 8 – oil pallet; 9 – stopper of a masloslivny opening; 10 – bolt of fastening of the oil pallet; 11 – forward cover of a bent shaft; 12 – bolt of fastening of a forward cover of a bent shaft; 13 – forward epiploon of a bent shaft

– merge engine oil, having turned off a stopper 9 (see fig. 3.54 ) a masloslivny opening;

– you will hang out the engine by means of the load-lifting mechanism;

– turn off bolts of fastening and remove protection of the oil pallet;

– turn off bolts of the 10th fastening of the oil pallet and remove the oil pallet 8 together with laying 7.

Installation of the oil pallet is carried out in the sequence, the return to removal. After installation fill in engine oil.