VW Passat repair+ 1. Ekspluatatsiiya of the car + 2. Maintenance + 3. Engines + 4. Cooling system + 5. Power supply system + 6. System of ignition + 7. Coupling + 8. Transmission + 9. Drive of forward wheels + 10. Suspension brackets + 11. Steering + 12. Brake system + 13. Wheels and tires + 14. Systems of heating, ventilation and conditioning + 15. Electric equipment - 16. Body + 16.1. General information 16.2. Care of a body + 16.3. Insignificant damages of a body 16.4. Considerable damages of a body 16.5. Moldings, facing of wheel niches + 16.6. Cowl elements 16.7. Forward and back bumpers 16.8. Forward cross beam of a body 16.9. Forward wing + 16:10. Luggage carrier elements + 16:11. Elements of a back door (cars with a body the versatile person) 16:12. Hinges and locks 16:13. Elimination of jingle of doors - 16:14. Elements of a forward door 16.14.1. Internal finishing of a forward door 16.14.2. Window regulator 16.14.3. Glass of a forward door 16.15.4. Window regulator electric motor 16.14.5. Side rear-view mirrors 16.14.6. Handle, locks and clamps of locks of a forward door 16.14.7. Forward door assembled 16.14.8. Sealant of a forward door + 16:15. Elements of a back door 16:16. Internal rear-view mirror 16:17. Central console + 16:18. Combination of devices 16:19. The receiver with system of coding 16:20. Glove box 16:21. Dashboard + 16:22. Front seats + 16:23. Back sitting + 16:24. Seat belts + 17. Electric circuits |
Repair Volkswagen Passat B3-B4/Passat B3-B4>> Body>> Elements of a forward door>> Side rear-view mirrors
In
fig. 16.32
details of a side mirror with manual adjustment are shown. The mirror with the electric drive has the similar device. Instead of the manual drive and cables the conducting and the switch mounted on the door panel are provided in the electric drive.
You make removal in the following order:
– remove a triangular slip 6 from the inside of a door;
– on mirrors with the electric drive disconnect the electric socket;
– unscrew screws 5 of fastening and remove the case 4 with a mirror 3 from a door;
– stick the bottom and upper edge of the case of a mirror with an adhesive tape to protect from damages;
– having undertaken the lower part, take a mirror from the case;
– holding a mirror, disconnect the contact socket of conducting (if it is provided).
You carry out installation to the sequences, the return to removal.
At assembly expose adjusting pins of a mirror in the place and press it into a casing.
At installation of a new mirror be convinced of its suitability for installation on the car.
Check adjustment of a mirror.
|
|