Fig. 16.1. Elements of decorative finishing of a body: 1 – forward molding; 2 – molding of a forward door; 3 – the fixing button; 4 – molding of a back door; 5 – back molding

For removal of moldings of 1, 2, 4, 5 (fig. 16.1) from a door, delay the top part of facing from a door and remove the lower part of facing from holders. At damage of the fixing button 3 at removal of facing replace the button. At installation of facing of a door establish its lower part on the holder and latch the top part of facing.

The holder of facing is pasted to a door.

For replacement of the holder warm up him hot air and remove. Before installation of the new holder clear a door surface of the glue remains, using VW-D 002000 solvent.

Fig. 16.2. Side finishing of a body: 1 – facing of a niche of a forward wheel; 2 – protective facing of a forward door, wheel; 3 – holder of facing; 4 – the fixing button; 5 – protective facing of a back door; 6 – facing of a niche of back; 7 – facing of thresholds; 8 – the fixing button; 9 – decorative cap

For removal of facing of a niche of wheels of 1, 6 (fig. 16.2) drill a head of the fixing button and take the main part of the button.