You make removal in the following order:

– disconnect a minus wire from the plug of the rechargeable battery;

– disconnect electric contact sockets from forward headlights;

– turn off bolts of fastening and remove the cowl lock from the panel;

– weaken fastening brackets, disconnect a tank of the amplifier of the brake system from the panel and remove it;

– remove an air inlet lattice;

– turn off two bolts, the fixing panels to the upper edge from each side of a forward wing;

Fig. 16.8. An arrangement of the self-cut screws on the lower part of a forward cross beam of a body

– unscrew the self-cut screws (fig. 16.8) of fastening of the panel from below;

– turn off the lower bolts of fastening from each party of the panel;

– remove the panel.

You carry out installation to the sequences, the return to removal.

Check work of forward headlights, the lock of a cowl and latch of safety.

Check adjustment of light of forward headlights.