Fig. 16.67. The Heidelberg VI receiver with the coding. The receiver differs from former models in existence of inscriptions on the forward panel and three handles – regulators of level of a signal, strip and the top frequencies

Fig. 16.68. When blocking the receiver on the display the SAF-e symbol appears

Some cars it is completed with the coded Heidelberg VI receiver (fig. 16.67) , the four-digit fixed code of the receiver is assigned by manufacturer. At the termination of power supply from the battery irrespective of the reason, for example, at a battery detachment, removal of a safety lock of the receiver or the receiver, the special electronic device locks the receiver which becomes disabled. When blocking the receiver on the display the designation "SAF-e" (fig. 16.68) appears .

After restoration of food for turning on of the receiver it is necessary to enter a protective code. The receiver perceives only the code which is written down by the manufacturer. This code cannot be changed. For maintenance of the Heidelberg VI receiver:

turn on the receiver (on the display the SAF-e symbol has to appear);

press the AM/FM and SCAN buttons and hold them until on the display the 1000 symbol appears;

NOTE Too long keeping of buttons, or casual repeated pressing are interpreted as incorrectly entered code.

enter a code, pressing the buttons of the program choice of stations, at the same time the gathered code will appear on the display;

NOTE After two and more unsuccessful attempts of a raskodirovka (for example, after introduction of the wrong code) the receiver is blocked, and its working capacity will not manage to be restored even introduction of the correct code. In this case leave the receiver included for a long time, about an hour then there will be a blocking dumping.

press the AM/FM and SCAN buttons. Hold buttons until on the display there is a SAF-e symbol then release;

enter the correct code in the described sequence.