You make removal in the following order:

– for access to a window regulator remove the decorative panel and the insulating screen in the way described above;

– disconnect sockets of conducting of the electric drive of a mirror, the central lock and the electric drive of a window regulator (depending on a car complete set;

Fig. 16.26. Window regulator of a forward door: 1 – door glass; 2 – the window regulator mechanism with the manual drive; 3 –;;;;;; 4 – the mechanism with the electric drive; 5 – electric drive of a window regulator; 6 – the directing plug; 7 – screw; 8 – overlay of the handle of a window regulator; 9 – window regulator handle; 10 – the guide flew down

– lower glass 1 ( fig. 16.26 );

– turn off two bolts of fastening of the holder of glass to a window regulator;

– lift glass against the stop and record in such situation an adhesive tape not to allow its falling;

Fig. 16.27. An arrangement of bolts of fastening of a window regulator (glass is completely lowered): 1 – the directing plug

– remove from a window regulator shaft the directing plug 1 ( fig. 16.27 );

– turn off bolts of fastening of a window regulator to a door framework;

– lift a window regulator, having got it from the lower eyes, and take it through an aperture at doors.

You carry out installation of a window regulator to the sequences, the return to removal.