Fig. 16.50. Details of the lock of a back door, latch of the lock and door handle: 1 – plastic washer; 2 – washer; 3 – limiter bolt; 4 – the lock with a latch; 5 – cover; 6 – blocking lever; 7 – bracket; 8 – draft of the drive from the internal handle; 9 – draft of blocking; 10 — the blocking lever; 11 – shlitsevy plug; 12 – blocking rod; 13 – the clamp button (screws on on a blocking rod); 14 – emphasis; 15 – bracket; 16 – adjusting bolt

Fig. 16.51. Lock and internal handle of opening of a back door: 1 – back door; 2 – draft of the lock; 3 – lock; 4 – screw; 5 – clamp; 6 – decorative slip; 7 – internal handle of opening of a door; 8 – sealant; 9 – draft of blocking; 10 – blocking button

Fig. 16.52. Removal of the door handle: 1 – screw; 2 – bracket; 3 – washer

In fig. 16.50 and 16.51 details of the lock of a back door, a clamp, the mechanism of unlocking and the internal handle are shown. For removal and installation of these details in most cases it will be required to remove a decorative upholstery with a water insulating film. The external door handle fastens the screw 1 ( fig. 16.52 ), access to which is provided from the inside of a door. After an otvorachivaniye of the screw displace the handle in the direction of an arrow, turn and remove from an axis.

Fig. 16.53. Removal of the lock of a back door with a latch: 1 – screw-driver

For removal of the door lock with a latch block the lever, as shown in fig. 16.53 .

Check existence of damages on a washer and a bracket.

Adjust a free wheeling of the handle turn of an adjusting bolt.

Adjusting data:

free wheeling of the handle (a gap between an end face of an adjusting bolt) – 0,1–1,0 mm.