Fig. 16.42. Overlays of corners of windows of a back door for cars with bodies the sedan and the station wagon. To remove a slip displace it in the direction of an arrow: 1 – sedan; 2 – versatile person

In fig. 16.41 elements of an upholstery of a back door are shown. Details of the handle of a window regulator and an overlay of the internal door handle are identical to similar details of a forward door. Decorative slips in a back part of windows at cars with body type the sedan and the station wagon are various ( fig. 16.42 ).

You make removal in the following order:

Fig. 16.41a. Details of an upholstery of a back door on early models: 1 – protective film; 2 – screw; 3 – bracket; 4 – overlay of the internal door handle; 5 – decorative upholstery of a door; 6 – a bracket of fixing of the button of locking (it is pressed inside); 7 – button of blocking of the door lock; 8 – slip; 9 – clamp of the decorative panel

– turn out the button of blocking 7 (see fig. 16.41a ) or 6 (see fig. 16.41b ) the door lock;

Fig. 16.41b. Details of an upholstery of a back door on later models: 1 – cap or high-frequency loudspeaker; 2 – decorative overlay of the handle; 3 – handle; 4, 5, 8, 12, 13 – screws; 6 – button of blocking of the door lock; 7 – locking button bracket; 9 – decorative panel; 10 – back decorative slip; 11,14 – bracket; 15 – rubber finishing; 16 – pocket; 17 – loudspeaker lattice; 18 – window regulator handle

– unscrew the screws shown in drawings;

– hook and take a sealant from the top part of an upholstery of a door;

– give the panel up and remove it.

If on the car electrowindow regulators are established, it is necessary to remove an overlay of the electric drive of a window regulator and to disconnect conducting.