You make removal in the following order:

– unclench brackets and remove a head restraint from the deleted sitting;

– unscrew the screw and uncover an internal guide;

Fig. 16.77. Fastening of a front seat: 1 – wedge; 2 – bolt; 3 – nut; 4 – finishing of a sled

– move a seat back, turn off the nut of 3 (fig. 16.77) fixing in front sitting to a sled and take a bolt 2 fastenings;

– move sitting against the stop forward and remove side finishing 4 sled from each party. For this purpose it is necessary to take a flat wedge 1 of finishing on a sled to remove a stopper and finishing of a sled on the other hand;

– move a seat back and disconnect it from a sled from each party;

– take a seat from the car.

Fig. 16.78. Details of a pillow of a front seat: 1 – seat pillow; 2 – framework; 3 – handle of adjustment of an inclination of a seatback; 4 – adjustment of an inclination of a pillow of a seat; 5 – adjustment of height of a pillow of a seat; 6 – handle of longitudinal adjustment of a seat

You carry out installation to the sequences, the return to removal. Details of a pillow and a back of front seats are shown in fig. 16.78 and 16.79 .

Fig. 16.79. Details of a back of a front seat: 1 – head restraint; 2 – a framework, 3 – a back decorative slip; 4 – handle of adjustment of side support; 5 – handle of adjustment of an inclination of a back сидень; 6 – seatback