Protective covers can be replaced, without removing steering transfer.

You make removal in the following order:

– you will hang out and fix a forward part of the car on basic racks;

– remove the corresponding wheel;

– measure visible number of rounds of a carving on inside of a tip of steering draft — it is necessary for correct installation of a tip of steering draft;

– weaken a lock-nut of fixing of steering draft;

Fig. 11.11. Removal of the spherical hinge of steering draft from a rotary fist

– turn off a nut of fastening of the spherical hinge of a tip of steering thirst for a rotary fist and, using a stripper of spherical hinges, take the hinge of steering draft from a rotary fist ( fig. 11.11 );

– disconnect a tip of steering draft from steering draft;

– turn off a lock-nut of steering draft;

Fig. 11.12. Removal of collars of fastening of protective covers of steering transfer

– remove collars ( fig. 11.12 ) and, shifting on steering draft, remove protective covers of steering transfer and steering draft.