6.5.1. Check of system of ignition of Digifant

6.5.2. Check of system of ignition of TC1-H

6.5.3. Check of system of ignition of FEI

6.5.4. Check of system of ignition of KE-Motronic

Carry out check of system of ignition in the following order:

– if the engine is turned by a starter, but not started, disconnect a high-voltage wire from any spark plug and connect it to an additional serviceable candle which case is reliably fixed on the engine;

– turn a bent shaft and attentively you look at an interelectrode gap of an additional candle. In it have to slip bright blue sparks periodically;

– if the spark is present, similarly check a condition of other high-voltage wires;

– turn out and check a condition of spark plugs;

– if the spark is absent, check a condition of high-voltage wires;

– at further lack of a spark check connection of the electric socket to the ignition coil;

– check accumulator tension;

– check the ignition coil;

– at further lack of a spark make repair of system of ignition on THAT.