Early models

You make removal in the following order:

Fig. 15.45. Removal of a frame of a fog light: 1 – bumper; 2 – frame of a fog light; 3 – percussion cap; 4 – razzhimny rivet

– having picked up the narrow screw-driver a razzhimny rivet from a percussion cap, remove a frame of a fog light ( fig. 15.45 );

– take percussion caps and remove a frame from facing of a bumper;

– turn out screws of fastening and take a headlight;

– uncover and will corrode a back part of a headlight;

– disconnect connection of a minus wire from a headlight;

– remove a fog light.

Fig. 15.46. Arrangement of fasteners of a fog light: 1 – fastening screw; 2 – screw of adjustment of a stream of light down

You carry out installation to the sequences, the return to removal. If necessary, rotating the adjusting screw, adjust headlight light in the vertical plane ( fig. 15.46 ).

Adjustment of light is not provided in the horizontal plane.