At switching off of the engine the electromagnetic valve of the device of a stop of the engine blocks fuel supply. The device is faulty if in the engine despite availability of fuel flashes in cylinders are not observed.

Check of the electromagnetic valve of a stop of the engine

Carry out in the following order:

at inclusion of ignition the electromagnetic valve of a stop of the engine has to publish characteristic click of operation of an electromagnet;

the click can be absent at the faulty device or violation of a power-supply circuit of the device. For check of a power-supply circuit include ignition and a control bulb on 12 in check presence of tension on contacts of the device;

if the bulb burns, the electromagnetic valve is faulty and is subject to replacement;

if the bulb does not burn, the electric chain from the ignition lock to the electromagnetic valve is faulty.

Removal and installation of the electromagnetic valve of a stop of the engine

Carry out in the following order:

the electromagnetic valve of a stop of the engine is located in a back part of the fuel pump;

disconnect a wire from the negative plug of the rechargeable battery;

disconnect the electric socket from the engine stop valve;

unscrew the electromagnetic valve from the case of the fuel pump 3;

installation is made in the sequence, the return to removal. At the same time it is necessary to use a new sealing ring of round section.