VW Passat repair


+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
- 13. Wheels and tires
   13.1. Technical characteristics
   13.2. Replacement of wheels
   13.3. Wheel bolts
   13.4. Running in of tires
   13.5. Storage of tires
   13.6. Balancing of wheels
   13.7. Antisliding chains
   13.8. Spare wheel
   13.9. Check of pressure in tires
   13:10. Check of a profile of tires
   13:11. Check of the gate
   13:12. Check of a radial and side beating of tires
   13:13. Check of a radial and side beating of disks
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
+ 16. Body
+ 17. Electric circuits



ed639308


Repair Volkswagen Passat B3-B4/Passat B3-B4>> Wheels and tires>> Check of a profile of tires
Intensive wear of tires is promoted by a sports manner of driving, intensive accelerations and sharp braking.

       NOTE
Tires can be operated to achievement of depth of a profile of 1,6 mm (flutes of a profile have to have depth on all surface of the tire not less than 1,6 mm). However for safety it is recommended to make change of tires with a depth of profile of 3 mm.

Sheena M+S on snow have sufficient coupling with the road with a depth of profile not less than 4 mm.
It is necessary to survey the tire on existence of cuts and to establish their depth. If cuts reach a cord, the steel cord will korrodirovat from the getting moisture.